February 18, 2012 in Articles
The USB Audio specification 2.0 defines multiple formats for audio of which standard PCM is only one. A general “raw data” format was also defined that can be used for any kind of data including audio, but unfortunately, no specific format was defined for DSD and with the ongoing proliferation of USB converters in the current market it appears that the opportunity for the official USB specification to adopt a single common method of transferring DSD audio via USB is slowly disappearing. This is an attempt of uniting as many manufacturers as possible and jointly defining a method for transferring DSD via USB.
The manufactuers developing audio playback software want to minimize the number of formats they need to support for a USB link. Ideally there is only a single such format. Likewise hardware manufacturers want to make their hardware compatible with as many playback platforms as possible. That, of course, only happens when all use the same format.
As mentioned above, USB Audio already supports a “raw data” format that could be used for DSD and that would create a clear separation to any audio data path containing PCM. However, the latest release of Apple’s operating system OS 10.7 incorporates a USB driver that only supports PCM. Furthermore, the central audio engine, CoreAudio, inside the OS only supports PCM as well, luckily with no limitation on sample rate. (earlier versions supported a mode that was compatible with raw data mode, but that is history). Since the architecture of Apple’s OS forces audio software developers to use CoreAudio for everything audio related there is basically only 1 format left for the Mac platform: PCM. Creating a separate path for DSD would involve a lot of surgery if it is even possible. So we have no choice, but to use a PCM path to transfer DSD audio by using special flags or headers that allow the receiving hardware to detect a format change and switch their decoder accordingly.
When using the Windows platform things are little easier: Windows by nature does not fully support USB Audio 2.0 and what it does support is limited to PCM only at a sample rate of 96kHz or less. There is no native driver support for higher resolution PCM and it is clear from the beginning that a custom driver needs to be created for this platform whether it is for regular PCM or DSD. Luckily a 3rd party software developer (Steinberg Audio) jumped in and created a driver (called ASIO) already many years ago that supports PCM and DSD with no limitation on sample rate or wordlength. It has become quite popular and many software vendors support this in the meantime. ASIO is not directly a hardware driver, but sits between the audio playback application and the hardware driver. Each hardware manufacturer still needs to develop a custom hardware driver for their own hardware, but ASIO then creates a common interface standard for all application software.
As seen above the Windows platform basically offers a solution with the ASIO driver and the raw data format supported by USB Audio 2.0. Not as ideal as having a dedicated DSD path via USB, but this is safe and straightforward.
Since the Apple OS only allows a PCM path we have to find a way to put DSD audio data into PCM frames that then get sent via the native USB driver. DSD has a sample size of 1 bit and a sample rate of 2.8224MHz. In other words the data rate is 2.8224Mbits/sec. This is equivalent to 16 bit PCM at 176.4kHz. In order to clearly identify when this PCM stream contains DSD and when it contains PCM we will need additional bits. The PCM format with the next higher bit rate is 24 bits at a sample rate of 176.4kHz. This gives us 8 bits for this marker of identifier. It seems a bit overkill if all we need is 2 states (8 bits give us 256 states), but we will see that this extra overhead comes in handy. Here is how we can use the 24 bits in each sample and for each channel:
The 8 most significant bits are used for the DSD marker and alternate with each sample between 0×05 and 0xFA. Each channel within a sample contains the same marker. This has been chosen to minimize the click that might be experienced when the receiving hardware misinterpretes the data as PCM when it really is DSD. If this should happen it would create a tone around 88kHz and roughly -40db, nothing harmful and something that most D/A converters would suppress to some degree before it even reaches the loudspeaker. It should be pointed out that hardware manufacturers and software developers alike can easily use common safeguards to prevent such cases of erroneous format switching and that they may only be limited to times during development of hardware and software. It is their responsibility to prevent misinterpreted cases and to test their products thoroughly before release. Misinterpreation of PCM data as DSD may create less predictable clicks.
The remaining 16 lower bits are then used for the DSD data, first or oldest bit in slot t0. The USB Audio specification assigns each PCM Frame to a specific channel (left, right etc.) and when used for DSD streaming each PCM Frame contains only DSD data corresponding to its assigned channel.
Recommended implementation for receiver
While there is certainly more than one way to implement this solution on the receiver side, the authors found the following implementation to work reliably:
- In order to switch from PCM to DSD mode the receiver has to detect 32 consecutive DSD marker bytes on all channels used.
- In order to switch from DSD to PCM mode the receiver has to detect at least 1 single missing DSD marker byte in at least 1 channel.
This introduces an additional latency of around 180usec. If the USB buffers are accessible for reading while the USB microframe is still being received then no additional delay is necessary.
The following have contributed to this document and/or pledged their support for this format (alphabetical order):
|Channel D||Rob Robinson|
|dCS||Andy McHarg, David J. Steven|
|JRiver, Inc.||Matt Ashland|
|Merging Technologies||Dominique Brulhart|
|Playback Designs||Andreas Koch|
|Sonic Solutions||Jon Reichbach|
|Wavelength Audio||Gordon Rankin|
|0.1||2012/01/20||Andreas Koch, Andy McHarg, Rob Robinson||Initial version|
|0.2||2012/02/07||Andreas Koch, Andy McHarg, Rob Robinson||Updated Industry support section, added recommended mplementation|
|0.3||2012/02/09||Andreas Koch, Andy McHarg, Rob Robinson||Updated industry support section, clarified channel assignment, deleted recommendation about ASIO driver.|
|1.0||2012/02/17||Andreas Koch, Andy McHarg, Rob Robinson||Release version 1.0|
This content is restricted to site members. If you are an existing user, please login. New users may subscribe below.